BIKEMANIA.BIZ

The Prodeco Technologies Phantom X Lite has terrific torque and speed.

---

The demand for this bike is extremely high but they take time to assemble because Prodeco requires its technicians to adhere to the highest quality assurance standards.
So it can take 10 working days to prepare your bike for shipping.
The bike is worth the wait!

---

MADE IN THE USA!

Prodeco Technologies was established with the sole purpose of REVOLUTIONIZING the electric bicycle industry.
After three years of intensive research and development, Prodeco believes that USA BUILT is the only acceptable approach.
Prodeco utilizes only the highest quality components.
Prodeco's electric bicycles were also developed with weight savings as a priority - up to 25% lighter that comparative products.

---

The demand for this bike is extremely high and, since Prodeco Technologies requires its technicians to adhere to the highest quality assurance standards, the bike takes time to assemble.
So it can take up to 30 days to prepare your bike for shipping.
This bike is worth the wait!

---

Hold onto your hats while you get acquainted with a truly tremendous vehicle from the Phantom family.

These beastly bikes boast our most powerful designs and have the ability to climb the steepest of gradients.
Not only do these bikes have terrific torque and speed, but by using an advanced lithium iron phosphate battery system, they are pushing the limits of longevity.
The focus for this series was to mimic, as closely as possible, the feel of an electric scooter, while still leaving room for fitness fanatics to stretch out their legs and add extra speed to their ride.

Choose from either the original Phantom X, its upgraded successor, the Phantom X2 Police Bike, or the diet version, the Phantom Lite, for those who can't stomach the supremacy of a 500 watt motor.

The blacked out scheme with red trim makes this series our most stylish yet.
Overall, the Phantom has received reviews that exceeded our expectations in all areas, including style, performance, efficiency, and comfort.

Blow past your buddies like a bat in the night.
When you ride a Phantom you can be sure they will notice your incredibly sleek piece of machinery, that is, if they are quick enough to catch a glimpse of you racing by.

---

Prodeco Technologies developed the Phantom X Li as a high powered electric bicycle that can take steep inclines with little to no pedaling effort.
At 300W, power is sufficient and ready to push you around town.

The Phantom X’ Li's high torque motor required a battery up to the challenge.
A 38V 6Ah LiFePO4 2000 charge cycle Li-ion removable battery with built in LED rear light was developed specifically for this model to dish out the Amps as needed.

The Phantom X is finished in all Flat Black, with a full array of anodized and sandblasted components and hint of red trim.

This is a serious road machine ready to turn some miles.
There is no other electric bike on the market which can compare.
At $1199, the Phantom X Li costs ½ of the closest quality competitor’s model yet with better quality.

Quick disconnects, 2,000 charge cycle li-ion battery and a manufacturer's Lifetime frame warranty and 2 year component warranty equals problem free riding.
SUV's are no longer necessary to transport your bike, this beauty folds.

Built to last with alloys and stainless steel components.
Arriving fully assembled with only one stem bolt needing to be tightened.

FEATURES:
Patented Aluminum Folding Frame
Fabricated from aircraft grade aluminum, the Phantom X Li’s frame is designed for strength, portability, comfort, quality and longevity while maintaining a unique style.
An overlapping Heavy Duty adjustable folding mechanism with an integrated safety latch assures the easy 15 second fold while offering the strength of a rigid frame.
A front hub motor drive to for highly improved balancing, the uses of the latest technology in gear systems simplified servicing.

SHIPS ASSEMBLED:
The Phantom X Li’s folding frame allows the bicycle to be shipped fully assembled.
There are no requirements other than one stem bolt to tighten when receiving the bicycle.
Be up and running in a few minutes.

Speed: 18 MPH*
Range: 25 - 35 Miles*

SPECIFICATIONS:
Frame: Folding 6061 Aircraft Grade Aluminum
Frame Finish: Flat Black w/ Satin Clear Coat
Component Finish: Anodized & Sandblasted Black, Red Accents
Forks: ZXR Magnesium, AL Stanchion & Pre-Load
Motor: Prodeco 300W Brushless Front Hub
Battery: 38.4V 9Ah LiFEPO4
Handlebar: Promax Aluminum 31.8 Straight Bar
Stem: Promax Adjustable 31.8 Stem
Headset: Alloy Top w/ Integated Cartridge Bearing
Crankset: 44T x 3/32" w/ 170mm Forged Alloy Arms
Chain Guard: Aluminum Alloy Sandblasted
Chain: KMC X8.93 High Performance 1/2" x 3/32"
Derailleur: Shimano Altus 7 Speed
Cassette: Shimano HyperGlide HG41 11-28T
Front Brake: Promax XL 203mm Tool Free Disc Brake
Rear Brake: Promax XL 203mm Tool Free Disc Brake
Rims: 12G x 36H Triple Wall Alloy Deep Dish
Spokes: 18-8 Black 12 Gauge Stainless Steel
Tires: Kenda Kontact 26" x 2.125"
Rear Hub: 135mm Aluminum 7 Speed Free Hub QR
Seatpost: Promax Aluminum 27.2 x 350
Saddle: Sport Vented 10.25" x 6.25" w/ Red Stitching
Powered: Thumb Throttle
Charger: 43.8V 2Ah
Charging Time: 4 Hours
Charge Cycles: 2000 +
Frame Warranty: Lifetime
Electronics Warranty: 2 Years
Weight: 48 LBS

* Rider Weight, Rider Input and Terrain Contingent

---

FEATURES:
Patented Aluminum Folding Frame
Fabricated from aircraft grade aluminum, the G Plus Mariner’s frame is designed for strength, portability, comfort, quality and longevity while maintaining a unique style.
An overlapping Heavy Duty adjustable folding mechanism with an integrated safety latch assures the easy 15 second fold while offering the strength of a rigid frame.

USA Built
All Prodeco electric bicycles are designed, assembled and quality controlled in the USA.
Bicycles are produced on a daily basis in our Florida facility with no inventory being built older than 1 week prior to shipping.
This allows for all components including batteries to remain 100% fresh and the latest stock.
Overseas quality control is not consistent and the reason behind Prodeco’s reasoning for building in the USA.

LiFePO4 Li-ion Battery Systems
Manganese and Cobalt have been the main choice in Lithium cathode material used for the lithium electric bicycle market over the past three years.
The high cost but low life expectancy (700 cycles) of these batteries fails to offer the longevity required by most ebike riders.
LiFePO4, the latest lithium technology increases the cycle life to 2,000 plus.
The LiFePO4 system is highly more stable, can charge at higher amps and does not deteriorate with heat unlike the majority of the current ebike lithium batteries.

Cartridge Bearing Headsets
The Mariner uses an upper and lower cartridge bearing headset with a sealed aluminum alloy cap for high strength, years of issue free performance, and zero rust.

12G Stainless Steel Spokes
Stainless Steel 12G spokes are thicker and up to 100% stronger than the typical 14G spokes found on most traditional bicycles.
The added strength will offer years of issue-free performance while sacrificing minimally in weight savings.
Stainless steel is used for its natural resistance to rust and high strength.

Triple Wall Rim
Rim strength is important with any bicycle; but, with electric bicycles it is of utmost importance.
Electric bicycles consistently travel at higher speeds than traditional bikes.
With the added strength of 12G spokes and a motorized HUB, rims have to be above standard strength.

Quick Release Rear Axle
The Quick Release “QR” axle offers a “tool free” 30 second rear wheel removal for flats, service or as a theft deterrent.
With the quick removal of the rear axle, the bike will no longer be able to be ridden and tire or tube changes are a breeze.