Quick Bike Check

AIR
Inflate tires to rated pressure as listed on the side­wall of the tire. Use a pressure gauge to insure proper pressure. Check for damage to tire tread and sidewall; replace if damaged.

BRAKES
Inspect pads for wear; replace warn out pads. Check pad adjustment; make sure they do not rub tire or dive into spokes. Check brake level travel; at least 1” between bar and lever when applied.

CRANKS, CHAIN & CASSETTE
Make sure that your crank bolts are tight; lube the threads only, nothing else. Check your chain for wear; 12 links should meas­ure no more than l21/8 inches. If your chain skips on your cassette, you might need a new one or just an adjustment.

QUICK RELEASE
Hubs need to be tight in the frame; your quick release should engage at 90 degrees. Your hub quick release should point back to insure that nothing catches on it. Inspect brake quick releases to insure that they have been re-engaged.

TEST RIDE
Take a quick ride to check if derailleurs and brakes are working properly.
Inspect the bike for loose or broken parts; tighten, replace or fix them.  Pay extra attention to your bike during the first few miles of the ride.